Chimney structures should be maintained clean and in good shape so that they help in venting the home. For the fireplaces and stoves to operate efficiently, the smoke and gases released should be extracted from a house. A chimney service NJ can help in cleaning, repair, and restoration of the chimneys. The fireplace and stoves are the focus of the family since they offer some great time to chill off from the cold winter nights.
But it also comes with another set of problem and dangers- possibility of having fire hazards. When you burn wood in stoves and fireplaces, it releases a substance called creosote, which deposits on walls of chimneys. This substance is responsible for many of the fires witnessed in homes.
Removing soot and other forms of debris may be easy but when it comes to removal of creosote, this is where the rubber meets the road. Creosote will not come out easily and you have to use the right skill and expertise to get rid of this substance. When it sticks on walls of flues, creosote forms a hardened layer that is tar like.
As you continue burning wood, chimneys begin to clog with debris. The smoke and gases being released are driven up the drafts and they form a layer on the flue walls. Not all smoke and gases will be released outside. Some will condense just before they reach outside and form the creosote.
When sparks are released from burning wood, they may go up and reach the areas where creosote has formed. This flammable material will ignite and cause fires to occur. In order to prevent such fires, you can clean and remove the flammable material before it accumulates in large amounts. You may see that the wood is burning completely and what is left is the ash.
Burning dry or seasoned wood may have less amounts of creosote than burning wet or undried wood. If you are choosing wood to burn, ensure that you get the right one and it is dry enough. People also believe that when they burn wet or undried wood, it will take more time before it is turned into ashes, something that may indicate saving money on energy.
Since chimneys are cooler at the top parts, it is those areas where condensation of some of the by-products occurs. Such condensation causes creosote to form on flue walls. This material is flammable and whenever there are sparks or embers of burning wood released, they can fly and reach the top parts of chimneys. In contact with creosote, the embers may cause fires.
Damaged flue liners not only allow heat to spread but also expose the structure to moisture damage. During the rainy season, water may enter through the top or cracks on masonry work and reach the flues of chimneys thus causing damage. Creosote can mix up with water to form acids that further continue to eat away the flue liners and the masonry work.
You can visit achimneyman.com for more helpful information about Top Reasons To Seek Chimney Service NJ.